SLQ-150A High Current Generator
It combines the advantages of similar products at home and abroad, adopts numerical control technology, and has strong anti-interference ability. Compared with the previous generation of current generators, due to the use of low-power, large-capacity auto-coupling voltage regulators and current transformers made of high-permeability iron cores, it has the advantages of large output power, small size, and light weight.
Scope of Application:
SLQ-150A High Current Generator
Mainly used for calibration of thermal relays, motor protectors, contactors, circuit breakers, air switches, switch cabinets, circuit breakers, and protection panels.
Main Functions:
Can output 0-1000A current for a long time
Can synchronously test the action time of equipment
Automatic identification of normally open and normally closed contacts
Can connect multiple calibrators in series simultaneously to improve work efficiency
Performance Features:
Adopts a beautiful and generous PVC panel
Directly displays primary current, convenient for test observation and recording.
High measurement accuracy 0.2 level
Large power, small size, strong load capacity
Small size, light weight, only 30% to 70% of the volume of similar products, very convenient to carry.
Operation Aspects:
(1) After wiring, check once to see if there are any wiring errors and whether the connectors are in good contact.
(2) During the test, if there are abnormal phenomena such as sparking or no display at startup, immediately turn off the power and recheck the wiring.
(3) In actual wiring, the current output terminals should form a loop, otherwise the instrument will not output current.
(4) This current generator comes with random output wires; the external copper conductor should be selected according to 10A/mm2. (Standard configuration is two 1-meter test leads)
(5) The equipment capacity is designed for short-term work of 5 minutes. If used for batch testing, the working time should be less than 2.5 minutes, and wait 10 minutes before the next work. If doing temperature rise tests (30 minutes to 24 hours), it should be configured according to long-term working temperature rise.
