Three-Frequency Induction Voltage Generator Manufacturer
Introduction
Yangzhou Dary provides three-frequency induction voltage generator manufacturer prices, three-frequency induction voltage generator manufacturer quotes, product selection, technical support, its simple operation, reliable performance, can better meet the needs of transformer and mutual inductor induced voltage withstand tests.
The induced voltage withstand test of transformers, mutual inductors, generators, motors and other equipment is an important test to ensure that the quality of the equipment meets national standards. The longitudinal insulation induced voltage withstand test of coil winding inter-turn, inter-layer, inter-section and inter-phase insulation is an important item in electrical equipment insulation tests. Based on the particularity of longitudinal insulation tests, it is necessary to apply a frequency multiplier power supply device to increase the test voltage between winding insulations, thereby achieving the purpose of the withstand voltage test.
The SFQ-81 series three-frequency power supply generator is designed and manufactured to meet the above requirements. It has been proven by the majority of users: its simple operation, reliable performance, can better meet the needs of transformer and mutual inductor induced voltage withstand tests.
Three-Frequency Induction Voltage Generator ManufacturerProduct Technical Parameters:
Input Voltage: 220V, 50Hz
Output Voltage: 50—500V (Max 750V), 150Hz
100—1000V (Max 1500V), 150Hz
Waveform: Sine wave, distortion less than 1%
Capacity: 1-1000KVA
Load Characteristics: Resistive, inductive, capacitive all acceptable
|
Capacity KVA
|
Input Voltage (Three-phase)
|
Output Voltage
|
Output Current
|
Dimensions
|
Weight
|
|
5
|
220V
|
400V
|
20A
|
450×250×320
|
40kg
|
|
12
|
380V
|
560V
|
25A
|
490×260×335
|
78kg
|
|
24
|
380V
|
640V
|
30A
|
680×280×400
|
150kg
|
Three-Frequency Induction Voltage Generator ManufacturerProduct Usage Method:
This device is a split-type equipment. That is, the three-frequency power supply generator and the three-frequency control device, and is equipped with overvoltage protection, ammeter, three-frequency output, voltmeter for monitoring and ease of use. The wiring terminals on the back panel of the control device are shown in the figure below (connect this device into the circuit according to the wiring diagram, pay attention to equipment grounding)
