Triple Multi-Frequency Induced Withstand Voltage Generator 5KVA10KVA
Darui Electric recommends
The Triple Multi-Frequency Induced Withstand Voltage Generator 5KVA10KVA is a specialized device designed and manufactured specifically for power departments and industrial and mining enterprises to conduct current load tests and temperature rise tests on various switches, current transformers, and other electrical equipment during electrical equipment testing.
Working principle of the Triple Multi-Frequency Induced Withstand Voltage Generator 5KVA10KVA:
1. The instrument must be properly grounded.
2. After connecting the working power supply, turn on the switch, the red indicator light will be on. Press the start button, the green indicator light will be on. Connect the output terminal to the test object, and the current generator will wait to increase the current.
3. Rotate the voltage regulator clockwise evenly, and pay attention to the output current indicator on the operation panel until the required large current is reached.
4. During the test, once any abnormal phenomenon is found, immediately cut off the power supply, and conduct the test again after finding out the cause.
5. After the test, the voltage regulator must be returned to zero, press the stop button to cut off the power supply, and then disconnect the working power supply before removing the test wiring to ensure safety.
Product aliases:
Current generator, intelligent large current generator, programmable large current generator, portable multifunctional large current generator
Electrical parameters of the Triple Multi-Frequency Induced Withstand Voltage Generator 5KVA10KVA
Input voltage: Three-phase 380V 50Hz
Output voltage: 600V 150Hz
Waveform: Sine wave, distortion less than 1%
Capacity: 15KVA
Load characteristics: Resistive, inductive, capacitive all applicable
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
