Containerized Load Bank - Yangzhou Darui - Yangzhou Darui Electric Co., Ltd.

Containerized Load Bank - Yangzhou Darui

Published: 2020-08-11 15:01:21

Category: Partial Discharge Tester

Product Description

Containerized Load Bank

Darui Electric recommends

Marine containerized load banks (ultra-high-power intelligent load banks) typically use diesel fuel for marine generators. When diesel engines operate below 50% load or remain unloaded for extended periods, incomplete combustion, carbon buildup, and reduced overall efficiency can occur, eventually leading to starting difficulties, insufficient power, increased fuel consumption, and premature overhaul or scrapping. Load banks serve as ideal artificial loads for generators. The ALB-DT marine containerized load bank (ultra-high-power intelligent load bank) is an ideal testing device for measuring parameters such as generator power, frequency, voltage, current, power factor, and stability.
The ALB-D intelligent three-phase AC load bank (diesel generator set test load bank) we provide can test the output power and load-bearing capacity of various generator sets.

Function Introduction:
1. Stainless steel fixed container design.
2. During acceptance of newly installed diesel generators, verify whether they meet design requirements.
3. After adding noise reduction equipment such as silencers to diesel generators, test whether their output power meets the operational needs of communication equipment.
4. After diesel generator repair, test whether performance indicators such as output power and load capacity meet requirements.
5. Routine maintenance and periodic testing of diesel generators: according to newly issued communication power supply maintenance regulations, load testing should be conducted for 15-30 minutes every six months.

Application Fields:
Load testing for ships, railways, electric power, and communication base station power supplies.

Main Technical Specifications
Discharge Power 10KW 20KW 20KW 20KW 20KW
Discharge Voltage Range AC 400V/20V Three-phase four-wire AC 400V/230V Three-phase four-wire AC 300V Three-phase four-wire AC 600V Three-phase four-wire AC 10.5KV Three-phase four-wire
Frequency Measurement Range 50HZ/60HZ 50HZ/60HZ 50HZ 50HZ 50HZ
Power Measurement Range 0-10kw 0-20kw 0-100kw 0-500kw 0-10kw
Adjustment Accuracy 1KW 0-20kw 1KW 1KW 1KW
Control Form AC Contactor AC Contactor High-voltage Vacuum Contactor High-voltage Vacuum Contactor High-voltage Vacuum Contactor
Power Supply Three-phase + N AC 380V Three-phase + N AC 380V Three-phase + N AC 380V Three-phase + N AC 380V Three-phase + N AC 380V
Protection Devices Overvoltage, high-temperature alarm, fan fault protection Overvoltage, high-temperature alarm, fan fault protection Overvoltage, high-temperature alarm, fan fault protection Overvoltage, high-temperature alarm, fan fault protection Overvoltage, high-temperature alarm, fan fault protection
Cooling Method Forced air cooling Forced air cooling Forced air cooling Forced air cooling Forced air cooling
Optional Functions Manual type / Computer remote control
Voltage ±(0.25% reading + 0.25% range) ±(0.25% reading + 0.25% range) Optional meter Optional meter Optional meter
Current ±(0.25% reading + 0.25% range) ±(0.25% reading + 0.25% range)
Power Power factor = 1.0: ±(0.25% reading + 0.25% range) Power factor = 1.0: ±(0.25% reading + 0.25% range)
Running Time ±2 seconds per hour ±2 seconds per hour
Energy Power factor = 1.0: ±(0.25% reading + 0.25% range) Power factor = 0.5: ±(0.5% reading + 0.5% range) Power factor = 1.0: ±(0.25% reading + 0.25% range) Power factor = 0.5: ±(0.5% reading + 0.5% range)

Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.

None Next →
UPS Fake Load Test - Yangzhou Darui

Product Details

Containerized Load Bank - Yangzhou Darui