Product Details

Technical Indicators:

Voltage level 10kV～300kV
Capacity range 1～500KVA
No-load current ＜7%
Impedance voltage ＜8%
Product type AC, AC/DC, AC series, AC/DC series

Technical Parameters

Usage Method:

(1) Before testing, the "┻" terminal of the high voltage test transformer's casing and the ground terminal "┻" of the power control box must be properly grounded, otherwise it will endanger personal and equipment safety.

(2) Before operation, you must be familiar with the electrical schematic wiring diagram of the high voltage test transformer and the power control box. If DC withstand voltage and leakage tests are to be performed, you can first screw the high voltage silicon stack or microammeter onto the high voltage terminal of the high voltage test transformer.

(3) After preparation, check the wiring for errors, then close the main power switch. At this time, the green switch indicator light will be on, indicating that the power is connected; at the same time, the indicator light on the green stop button should also be on. If it is not on, turn the voltage regulator handle counterclockwise back to zero, and the indicator light on the green stop button will be on; otherwise, the start button will refuse to close.

(4) Press the start button, the red button indicator light will be on. Then rotate the voltage regulator handle uniformly and slowly clockwise at a rate of 1.5 to 2 kV per second, the high voltage gradually rises, and pay close attention to the voltmeter indication and the condition of the test object, until the required test high voltage is reached.